Power on
Press
[SRC]
(
PWR:
POWER).
Power off
Hold down
[SRC]
(
PWR:
POWER).
14
General
This chapter explains how to turn on or off the power, how to adjust the volume, etc.
CQ-DX200W
You can remove the face plate to prevent it from being
stolen.
Removing
1
Turn off the power.
(
a
page 14)
2
Press
[
]
(Release).
(The face plate disen-
gages with a click
when it is removed.)
3
Put the face plate in the case.
Mounting
1
Slide the left side of the face plate in
place.
2
Press the right end of the face plate
until “click” is heard.
Power On/off
(PWR: POWER)
Cautions
¡
This face plate is not waterproof. Do not expose it to
water or excessive moisture.
¡
Do not remove the face plate while driving your car.
¡
Do not place the face plate on the dashboard or
nearby areas where the temperature rises to high
levels.
¡
Do not touch the contacts on the face plate or on the
main unit, since this may result in poor electrical
contacts.
¡
If dirt or other foreign substances adhere on the
contacts, wipe them off with a clean and dry cloth.
Notes:
¡
The volume level can be set independently for each
source. (For radio, one volume setting for AM, one
volume setting for all FMs)
¡
This unit memorizes individual volume levels for each
source. Make volume adjustments of each source
appropriately to prevent large volume fluctuation when
the source is changed.
q
Up
w
Down
Setting Range: 0 to 40
Default: 18
V
olume Adjustment
(VOLUME)
Face Plate Removing/Mounting
(ANTI-THEFT SYSTEM)
