E
N
G
L
I
S
H
18
CQ-R253U
27
E
N
G
L
I
S
H
17
CQ-R253U
26
Installation
(Continued)
To Remove the Unit
Switch off the power of the unit.
Remove the removable face plate.
Press [
]. (release button). The
removable face plate will be released.
1
Remove the Trim Plate
i
with a screwdriver.
2
Insert the Dismounting Plates,
u
along
the grooves on both sides of the main unit
until “click” is heard.
Pull out the unit while pushing the plates
further inside.
3
Remove the unit pulling with both hands.
4
CQ-R
223W
DOLB
Y B N
R
Push
Contact
i
Trim Plate
Screwdriver
u
Dismounting Plate
Insert
Pull out
MODE
NR
TUNE
REMOTE
Release button
Insert the tab
end in the
outer groove.
“Click”
Anti-Theft System
Caution:
• This face plate is not waterproof. Do not expose it to water or excessive moisture.
• Do not remove the face plate while driving your car.
• Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
• Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical contacts.
• If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
Place the Removable Face Plate
into Case
Switch off the power of the unit.
Remove the removable face plate. (
➡
page 26)
Gently press the bottom of the case and open the
cover. Place the face plate into the case and take it with
you when you leave the car.
Removable face plate case
CQ-R
223W
DOLB
Y B N
R
Install Removable Face Plate
Slide the left side of the removable face plate in place.
Press the right end of the removable face plate until
“click” is heard.
Tab
Cutout
Summary of Contents for CQ-R253U
Page 36: ...Memorandum Memorandum...
