Unit won’t turn on.
No disc at all in maga-
zine
63
CQ-VA707N
E
N
G
L
I
S
H
60
Press EJECT button on changer.
If trouble persists, press the
reset button on changer.
Trouble still persists, ask your
dealer or nearest service center
for repair.
Probable Solution
Disc dirty or wrong side
up
Problem
Display
Possible Cause
Probable Solution
Possible Cause
Dead vehicle battery
Ignition not on
Bad power battery line
connection
Bad accessory line
connection
Fuse burned out
Connections not made cor-
rectly
Charge vehicle battery.
Turn ignition to On or Acc.
Replace it with one of the specified rating.
Check connections.
Connect battery cables to terminals that are
always live.
Connect accessory power cord with ACC power
supply of the car.
Bad ground lead connection
Connect ground lead to a metallic part of your
car.
A connecting cord between
the display unit and the con-
trol unit is not connected
correctly.
Check the connecting cord between the display
unit and the control unit.
■
Error Display Message (CD Changer)
Note:
Display contents and operations vary in part from one changer to another (due to the differences
in changer specifications). For details, refer to the manual of the changer you are using.
Problem
NO DISC
Insert discs into magazine.
Eject magazine and check the
disc.
Next disc is
automatically
selected.
–
–
No magazine in the
changer
NO MAGAZINE
Load the changer with the maga-
zine.
–
Receiver fails to
operate
Disc damaged
– E3 –
– E1 –
– E2 –
Troubleshooting Tips
■
Power
