background image

62

CQ-C9800/9700U

CQ-C9800/9700U

63

Security Indicator

The security indicator blinks when the face plate is 
removed from the unit.

This function is activated when the security function 
is on (page 52).

Notes on Discs

E
N

G

L

I

S
H

43

E
N

G

L

I

S
H

44

Anti-Theft System

Notes on CD-Rs/RWs

 You may have trouble playing back some 

CD-R/RW discs recorded on CD recorders 
(CD-R/RW drives), either due to their recording 
characteristics or dirt, fi ngerprints, scratches, etc. 
on the disc surface.

 CD-R/RW discs are less resistant to high 

temperatures and high humidity than ordinary 
music CDs. Leaving them inside a car for 
extended periods may damage them and make 
playback impossible.

 Some CD-R/RWs cannot be played back 

successfully thanks to incompatibility among 
writing software, a CD recorder (CD-R/RW drive) 
and the discs.

 This player cannot play the CD-R/RW discs if the 

session is not closed.

 This player cannot play the CD-R/RW discs which 

contains other than CD-DA or MP3/WMA data.

 Be sure to observe the instructions of CD-R/RW 

disc for handling it.

Remove the Removable Face Plate

1

 

Switch off the power of the unit 

(page 22).

2

 Press 

[     ] 

(release) to remove the removable 

face plate. 

  (The face plate disengages with a click when it is 

removed.)

Note:

  Be absolutely sure to turn off the main unit’s

power before removing the removable face plate.

  

 Do not install or remove the removable face plate 
while it is moving.

3

 Gently press the bottom of the case and open the 

cover. Place the face plate into the case and take 
it with you when you leave the car.

Caution:

 

This face plate is not waterproof. Do not expose 
it to water or excessive moisture.

 

Do not remove the face plate while driving your 
car.

 

Do not place the face plate on the dashboard 
or nearby areas where the temperature rises to 
high level.

 

Do not touch the contacts on the face plate or 
on the main unit, since this may result in poor 
electrical contacts.

 

If dirt or other foreign substances get on the 
contacts, wipe them off with a clean and dry 
cloth.

 

To avoid damaging the face plate, do not push it 
down or place objects on it while it is open.

 The front panel will automatically close about 

5 seconds after 

[      ]

 (release) is pressed while 

the front panel is tilted or open, so take care to 
ensure that your fi ngers will not be pinched by 
the closing panel.

Security indicator

This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable. 

Removable face 
plate case

Install Removable Face Plate

1

 Slide the left side of the removable face plate in 

place.

2

 Press the right end of removable face plate until 

“click” is heard.

Panel Removal Alarm

This alarm sounds to warn you not to forget to 
remove the panel before leaving your car. 

This function is activated when the security function 
is on (page 52).

Notes on CD/CD Media 
(CD-R, CD-RW, CD-ROM)

How to hold the disc

 Do not touch the underside of the disc.

 Do not scratch the disc.

 Do not bend the disc.

 When not in use, keep the disc in the case.

If you use commercial CDs, they must have 
either of these labels below.

Label side

Do not use irregularly shaped discs.

Do not leave discs on the following places:

 Direct sunlight

 Near car heaters

 Dirty, dusty and damp areas

 Seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center 
outward.

<Correct>

<Wrong>

Do not attach any seals or labels to your discs.

Do not write anything on the disc label with a 
pointed pen or hard-point pen.

Contact

[      ]

 (Release)

1

2

Contact

Slide.

Press.

Summary of Contents for CQC9700U - AUTO RADIO/CD DECK


































Reviews: