- 13 -
Preparation
Batter
y
Installation
Clock Setting
Pull the insulation fi lm out from
the backside of the remote control
gently.
1
Set your car’s ignition switch
to the ACC or ON position.
C
C
A
N
O
The 12-hour system is used for the clock.
1
Press
[DISP]
.
(clock display)
2
Hold down
[DISP]
for more than
2 seconds.
Hour blinks
3
Adjust the hour.
Hour entered
[
]
: sets the hour ahead.
[
]
: sets the hour back.
4
Press
[DISP]
.
Minute blinks
5
Adjust the minute.
Minute entered
[
]
: sets the minute ahead.
[
]
: sets the minute back.
6
Press
[DISP]
.
Completed
Notes:
• “ADJUST” is displayed before adjusting the clock.
• Hold down
[
]
or
[
]
to change numbers rapidly.
• When “NO DISC” is displayed, the clock cannot be
adjusted.
Clock Display at Power Off
Press
[DISP]
to change the display.
Display off
Clock display (Default)
Note:
Battery Information:
Battery Type: Panasonic lithium battery (CR2025) (Included
in the remote control)
Battery Life: Approximately 6 months under normal use (at
room temperature)
2
Press
[SRC] (PWR:
Power
)
.
\CQ-RX400U\ \CQ-RX200U\
The demonstration message appears for initial
use.
1
Set your car’s ignition switch to the ACC or
ON position.
\CQ-RX400U\
\CQ-RX200U\
2
Press
[SRC] (PWR:
Power
)
.
3
Hold down
[VOL] (PUSH SEL:
Select
)
for
2 sec. or more to open the function menu.
4
Press
[VOL] (PUSH SEL:
Select
)
to
select DEMO.
5
Turn
[VOL]
counterclockwise.
For using the remote control, press
[0] (
)
.
Notes:
• To return to the regular mode, press
[DISP]
.
• Refer to the section on “Function Settings”.
• When “NO USB” (
\CQ-RX400U\
) or “NO DISC” is displayed,
the Demonstration cannot be cancelled.
First T
ime
Power On
Cancellation of
Demonstration
Summary of Contents for CQRX400U - AUTO RADIO/CD/MP3 DECK
Page 24: ...24 Memorandum...
