4
PRODUCT OVERVIEW
Hints
Troubleshooting
l
Indoor fan stops occasionally during Automatic Fan
Speed setting.
ä
This is an advanced feature that helps to remove smell from the
surrounding area during operation.
l
If you wish to have the cool air blowing directly on you, set the airflow direction downward but not for an excessive length of time,
as it may harm your health.
l
Approximately 10% of electricity can be saved if you set the temperature 1°C higher than the desired temperature during cooling
operation.
Reset terminals
• Make sure it is not obstructed.
• Maximum distances : 8m.
• Certain fluorescent lights may
interfere with signal transmission.
Consult your dealer.
• If the display is chaotic or can not
be adjusted, use a screwdriver to
short the two terminals to reset the
remote control to the original set by
manufacturer.
Remote Control Preparation
n
About
Remote Control Signal
• Insert batteries
(AAA or R03)
• The batteries can be used for
approximately 1 year.
• Remove the batteries if the
unit is not to be used for a
long period.
• The batteries must be
recycled or disposed of properly.
Note:
• The retention period of batteries might
be affected to be shorter because of
the using times of the remote control,
even less than one year.
• Pull out
Off/On
Temperature setting
Remote Control
Reset the remote control
Transmitter
LCD display
Operation mode
Timer setting
Fan speed selection
F566272_EN.indd 4
2008-12-16 9:59:15
