Panasonic CS-E12QD3RW, Operating Instructions Manual

8

To set the timer

Weekly timer setting

Promotes energy saving by allowing you to set 

up to 6 programmes in any given day.

TIMER/CLOCK

CANCEL

CLOCK

SELECT

MODE

OFF/ON

SET

UP

DOWN

Lights up if Timer operation is selected

Programme number in a 

day (1 ~ 6)

Time to be selected 

(10 minutes step)

ON Timer

OFF Timer

Day to be selected

Indicates the selected day

Indicates the next timer 

operation day

1.  Press TIMER 

MODE

 for 4 seconds to change 

display to weekly timer.

2.  Press TIMER 

UP

 or 

DOWN

 to select your 

desired day.

3.  Press 

SELECT

 to confi rm your selection.

4.  “1” will be blinking, press 

SELECT

 to set 

programme 1.

5.  Press TIMER 

OFF/ON

 to select ON or OFF timer.

6.  Press TIMER 

UP

 or 

DOWN

 to select your 

desired time. 
If you want to set the timer together with 
your desired temperature, press 

TEMP

 to 

select the temperature.

7.  Press 

SET

 to confi rm programme 1. The 

selected day will be highlighted with 

.

• After 2 seconds, the display will move to the 

next programme. Repeat steps 4 to 7 to set 

programmes 2 to 6. 

• During timer setup, if no button is pressed within 

30 seconds, or if the 

SET

 button is pressed, the 

setting at that moment is con

fi

 rmed and timer 

setup is ended.

To check current timer programme

1. Press  TIMER 

MODE

 to enter timer mode and 

press 

SELECT

 to enter day setting.

2. Press  TIMER 

UP

 or 

DOWN

 until your desired day is 

shown, press 

SELECT

 to con

fi

 rm your selection.

3. Press  TIMER 

UP

 or 

DOWN

 to check the set 

programmes.

To modify current timer programme or 
add new timer programme

1. Press  TIMER 

MODE

 to enter timer mode and 

press 

SELECT

 to enter day setting.

2. Press  TIMER 

UP

 or 

DOWN

 until your desired day is 

shown.

3. Perform steps 4 to 7 of “Weekly timer setting” 

to modify existing timer programme, or add any 
timer programme.

To cancel current timer programme

1. Press 

SELECT

 to enter day.

2. Press  TIMER 

UP

 or 

DOWN

 until your desired day is 

shown, press 

SELECT

 to enter programme setting.

3. Press  TIMER 

UP

 or 

DOWN

 until your desired day 

is shown. Press 

CANCEL

 to cancel the programme 

and 

 will disappear.

To disable/enable Weekly Timer

• To disable weekly timer setting, press TIMER 

MODE

, then press 

CANCEL

.

• To enable previous weekly timer setting, press 

TIMER 

MODE

, then press 

SET

 .

Note

• Daily timer and weekly timer could not be set 

at the same time.

• Same timer programme cannot be set in the 

same day.