Panasonic CS-E12TKA, Operating Instructions Manual

10

Cleaning instructions

POWERFUL

To ensure optimal performance of the unit, 
cleaning has to be carried out at regular 
intervals. Dirty unit may cause malfunction 
and you may see nanoe-G indicator blinks or 
error code “H99”. Please consult authorised 
dealer.

• Switch off the power supply and unplug before 

cleaning.

• Do not touch the aluminium 

fi

 n, sharp parts may 

cause injury.

• Do not use benzine, thinner or scouring powder.

• Use only soap (  pH 7) or neutral household 

detergent.

• Do not use water hotter than 40 °C / 104 °F.

nanoe-G Generator

Once every 2 weeks

• Clean with dry cotton bud.
• Do not touch during operation.

Air 

fi

 lters

Once every 2 weeks

• Wash/rinse the 

fi

 lters gently 

with water to avoid damage to 
the 

fi

 lter surface.

• Dry the 

fi

 lters thoroughly under shade, away 

from 

fi

 re or direct sunlight.

• Replace any damaged 

fi

 lters.

Remove air 

fi

 lter

Attach air 

fi

 lter

Insert into the unit

For seasonal inspection after extended 
non-use

• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL/

HEAT operation. After 15 minutes of 
operation, it is normal to have the following 
temperature difference between air inlet and 
air outlet vents: 

COOL: 

≥

8 °C / 14.4 °F

HEAT: 

≥

14 °C / 25.2 °F

For extended non-use

• Activate HEAT mode for 2~3 hours to remove 

moisture left in the internal parts thoroughly to 
prevent mould growth.

• Turn off the power supply and unplug.
• Remove the remote control batteries.

Indoor unit

Wipe the unit gently with a soft, 
dry cloth.

Human activity sensor

Do not hit or violently press or poke it with a sharp 
object. This can lead to damage and malfunction.

Front panel

Wash gently and dry.

Remove the front panel

1   Release the 

hooks at 
both ends

2   

Pull out and lift up

POWERFUL

Close it securely

POWERFUL

1

Insert 
at both 
sides

2

Push in

3

Close down

4  Press both ends and center of the front panel

Indoor unit

Aluminium 

fi

 n

Front panel

Air 

fi

 lters

nanoe-G Generator

Human activity 
sensor