Panasonic CS-E12TKA, Operating Instructions Manual

7

English

See "To learn more..." for details.

How to use

To purify the air

nanoe-G

• nanoe-G starts automatically when the unit is 

turned on with 

OFF/ON

.

• Can be activated even when the unit is turned 

off. In this condition, the unit will operate as a fan 
with AUTO fan speed and 

fl

 ap swing.

To deactivate viruses/bacteria on the 

fi

 lter

nanoe-G

POWER

• After the unit is turned off, the nanoe-G in-

fi

 lter 

deactivation may activate up to 150 minutes. 
Turning on the unit cancels this operation.

FAN SPEED

To select fan speed 

(Remote control display)

AUTO

FAN

• For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

AIR SWING

To adjust air

fl

 ow direction

(Remote control display)

• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the 

fl

 ap 

swings left/right and up/down automatically.

• In HEAT mode, if AUTO is set, the horizontal 

fl

 ap is 

fi

 xed at the predetermined position. 

The vertical 

fl

 ap swings left/right after the 

temperature rises.

• Do not adjust the 

fl

 ap by hand.

Note

 , 

 , 

SLEEP

 , 

• Can be activated in all modes and can be 

cancelled by pressing the respective button 
again.

 , 

• Cannot be selected at the same time.

Auto Restart Control

• If power is resumed after a power failure, the 

operation will restart automatically after a period 
of time with previous operation mode and air

fl

 ow 

direction. 

• This control is not applicable when TIMER is set.

To set the timer

2 sets of ON and OFF timers are available 
to turn ON or OFF the unit at different preset 
times.

TIMER

ON

SET

CANCEL

OFF

CANCEL

1

2

3

1

Select ON or OFF 
timer

Example: 
OFF at 22:00

• Each time pressed:

OFF

Cancel

2

Set the time

3

Con

fi

 rm

SET

TIMER

• To cancel ON or OFF timer, press 

ON

 or 

OFF

 to select respective   or   then press 

CANCEL

.

• If timer is cancelled manually or due to power 

failure, you can restore the timer again by 
pressing 

ON

 or 

OFF

 to select respective   

or   then press 

SET

.

• The nearest timer setting will be displayed and 

will activate in sequence.

• When ON Timer is set, the unit may start 

earlier (up to 15 minutes) before the actual 
set time in order to achieve the desired 
temperature on time.

• Timer operation is based on the clock set in 

the remote control and repeats daily once set. 
For clock setting, please refer to Quick guide.