background image

7

English

FAN SPEED

To select fan speed

(Remote control display)

• For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

AIR SWING

To adjust vertical air

fl

 ow 

direction

AIR SWING

(Remote control display)

• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver 

swings up/down automatically.

• In HEAT mode, if AUTO is set, the horizontal 

louver is 

fi

 xed at the predetermined position.

• Do not adjust the louver by hand.

How to use

To set the timer

2 sets of ON and OFF timers are available 
to turn ON or OFF the unit at different preset 
times.

TIMER

SET

CANCEL

ON

OFF

1

2

3

AC

C

CANCEL

3

AC

C

2

1

3

1

Select ON or OFF 
timer

Example: 
OFF at 22:00

• Each time pressed:

OFF

Cancel

2

Set the time

2

3

Con

fi

 rm

SET

TIMER

• To cancel ON or OFF timer, press 

ON

 or 

OFF

 

to select respective   or   then press 

CANCEL

.

• If timer is cancelled manually or due to power 

failure, you can restore the timer again by 
pressing 

ON

 or 

OFF

 to select respective   or 

 then press 

SET

.

• The nearest timer setting will be displayed and 

will activate in sequence.

• When ON Timer is set, the unit may start 

earlier (up to 35 minutes) before the actual 
set time in order to achieve the desired 
temperature on time.

• Timer operation is based on the clock set in 

the remote control and repeats daily once set. 
For clock setting, please refer to Quick guide.

Auto Restart Control

• If power is resumed after a power failure, the 

operation will restart automatically after a period 
of time with previous operation mode and air

fl

 ow 

direction. 

• This control is not applicable when TIMER is set.

Summary of Contents for CS-E9SB4RW













Reviews: