Panasonic CS-LV7SKA, Operating Instructions Manual

13

English

How to use

To adjust horizontal airfl ow direction

• Manually adjustable.

Note

POWERFUL/

QUIET

 , 

nanoe-G

 , 

SLEEP

• Can be activated in all modes and can be 

cancelled by pressing the respective button again.

POWERFUL/

QUIET

• Cannot be selected at the same time.

Auto Restart Control

• If power is resumed after a power failure, the 

operation will restart automatically after a period 

of time with previous operation mode and air

fl

 ow 

direction.

• This control is not applicable when TIMER is set.

Operation conditions

Use this air conditioner under the following 

temperature range.
DBT  : Dry bulb temperature

WBT  : Wet bulb temperature

Temperature (°C)

Indoor

Outdoor

DBT

WBT

DBT

WBT

COOL

Max.

32

23

43

26

Min.

16

11

16

11

POWERFUL/

QUIET

To switch between powerful & quiet

QUIET

POWERFUL

NORMAL

POWERFUL: To reach temperature quickly

POWERFUL/QUIET

• This operation stops automatically after 15 minutes.

QUIET: To enjoy quiet operation

POWERFUL/QUIET

• This operation reduces air

fl

 ow noise.

FAN SPEED

To select fan speed

(Remote control display)

AUTO

FAN

• For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

AIR SWING

To adjust vertical airfl ow direction

(Remote control display)

• Keeps the room ventilated.

• In COOL/DRY mode, if AUTO is set, the 

fl

 ap swings up/

down automatically.

• Do not adjust the 

fl

 ap by hand.

To set the timer

To turn ON or OFF the unit at a preset time.

ON

OFF

SET

CANCEL

1

2

3

TIMER

CANCEL

3

TIMER

1

2

3

1

Select ON or 
OFF timer

Example: 
OFF at 22:00

OFF

2

Set the time

2

3

Confi rm

SET

TIMER

• To cancel ON or OFF timer, press 

ON

 or 

OFF

 then press 

CANCEL

.

• When ON Timer is set, the unit may start 

earlier (up to 15 minutes) before the actual 
set time in order to achieve the desired 
temperature on time.

• Timer operation is based on the clock set in 

the remote control and repeats daily once 
set. For clock setting, please refer to Quick 
guide.

• If timer is cancelled manually or due to 

power failure, you can restore the previous 
setting (once power is resumed) by pressing  

SET

.