14
POWER
TIMER
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see error code “H99”. Please
consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium
fi
n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C.
Air fi lters
Every 2 weeks
• Wash/rinse the
fi
lters gently
with water to avoid damage to
the
fi
lter surface.
• Dry the
fi
lters thoroughly under shade, away
from
fi
re or direct sunlight.
• Replace any damaged
fi
lters.
Remove air fi lter
Attach air fi lter
Insert into the unit
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL
operation. After 15 minutes of operation, it
is normal to have the following temperature
difference between air inlet and air outlet
vents:
COOL:
≥
8 °C
For extended non-use
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Aluminium
fi
n
Front panel
Air
fi
lters
Indoor unit
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Front panel
Wash gently and dry.
Remove the front panel
POWER
TIMER
For both sides
1 Raise
2 Slide to the right or left
3 Pull out the panel
3
2
Close it securely
POWER
TIMER
Insert at both sides
1
2 Close down
3 Press both ends of the front panel
