33
To
learn more... / Cleaning instructions
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may retrieve error code “H 99”.
Please consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium
fi
n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
nanoe
TM
-G Generator
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air
fi
lters
Once every 2 weeks
• Wash/rinse the
fi
lters gently
with water to avoid damage
to the
fi
lter surface.
• Dry the
fi
lters thoroughly under shade, away
from
fi
re or direct sunlight.
• Replace any damaged
fi
lters.
Remove air
fi
lter
Attach air
fi
lter
Insert into the unit
Indoor unit
Wipe the unit gently with a soft, dry
cloth.
Coils and fans should be cleaned
periodically by authorised dealer.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain pipe.
Front panel
Wash gently and dry.
How to remove front panel
Raise over
horizontal
level
1
Pull upward
2
Horizontal
Close it securely
2
Match and push in
nanoe-G
AUTO
OFF/ON
1
Hold
horizontally
3
Close down
4 Press both ends and center of the front panel
nanoe-G
AUTO
OFF/ON
Aluminium
fi
n
Front panel
Air
fi
lters
nanoe
TM
-G Generator
English
Summary of Contents for CS-PU9WKH-8M
Page 38: ...Memo...
Page 39: ...Memo...