33
English
To
learn more... / Cleaning instructions
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. A dirty unit may cause malfunction
and you may see the nanoe TECHNOLOGY
indicator blinking or error code “H99”. Please
consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not use benzine, thinner or scouring powder.
• Use only soap (about pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
CAUTION
• Do not touch the aluminium
fi
n and sharp parts,
these parts may cause injury.
Indoor unit
Intake Grille
Front panel
Air
fi
lters
Dust Sensor
nanoe-G Generator
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be clean
for at least every 6 months by
authorised dealer.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain
pipe.
Intake grille
Wash gently and dry.
Remove the intake grille
1 Pull down
2 Air
fi
lter can
be remove at
this position
3 Pull down
again until a
‘click’ sound
is heard
* Air
fi
lter can be remove either at step 2 or 3.
4 Pull out
Close it securely
1 Insert to the hooks
Push backward until a ‘click’ sound
2 Attach air
fi
lters
3 Lift up and close
4 Press both ends of the intake grille
