- 4 -
Cable / Antenna (Cont.)
Antenna Connection
•
For proper reception of VHF/UHF channels, an
external antenna is required. For best reception
an outdoor antenna is recommended.
•
Antenna Mode must be set to TV.
Video/Audio In & Out Connection
Incoming Cable from Home Antenna
CT-1388YD, CT-1389VYD, CT-2088YD and CT-2089VYD
The IN and OUT terminals located on the back of Monitor directly pass the input signals through
the out terminals, so you may monitor or record the external Video/Audio information.
Operation
1.
Connect an external Video/Audio source to VIDEO 1, VIDEO 2 or VIDEO 3 IN terminals, as
shown.
2.
Select the same video mode that the equipment is connected to, by pressing the
TV/VIDEO or VIDEO SELECT button.
3.
Connect a Monitor or VCR to the Video/Audio out terminals as shown. The out terminals
will provide the same signals as the input terminals for monitoring or recording.
Note:
Video/Audio 1, 2 and 3 input and output terminals will operate whether the Monitor is ON or OFF.
VIDEO 3
AUDIO
VIDEO
AUTO 75
/HIGH
Ω
IN
OUT
S-VIDEO
IN
OUT
VIDEO 2
AUDIO
VIDEO
AUTO 75
/HIGH
Ω
IN
OUT
VIDEO 1
AUDIO
VIDEO
AUTO 75
/HIGH
Ω
IN
OUT
MONITOR OUT
AUDIO
VIDEO
OR
VCR
Monitor
External Audio/Video Equipment
O
PTIONAL
E
QUIPMENT
C
ONNECTION
Note:
Cable mode is preset at the factory. Antenna users must change to antenna mode in Set Up menu.
