6
O
PTIONAL
E
QUIPMENT
C
ONNECTIONS
Optional Equipment Connections
VCR Connection
VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the
optional equipment manual for more information.
Note:
Input 1 is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the
Y P
B
P
R
component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite
video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display
Component or Video 1 depending on which source is connected.
Note:
The remote control must be programmed with supplied codes to operate the VCR.
Procedure
1.
Connect equipment as shown to rear Audio/Video input jacks.
2.
Select the Video mode by pressing TV/VIDEO button.
3.
Operate optional equipment as instructed in equipment manual.
Front Control Panel
Press
to select VIDEO 3 input mode.
Note:
The front control panel located behind the customer control door can be used to access menus and switch video mode when
the remote control is not available.
A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details.
Procedure
1.
Connect equipment to front Audio/Video input jacks.
2.
Press TV/VIDEO button to select VIDEO 3 input mode.
3.
Operate optional equipment as instructed in equipment manual.
VCR
CABLES NOT SUPPLIED
TERMINALS
ON BACK OF THE TV
S-VIDEO
AUDIO
VIDEO/Y
P
B
P
R
PROG
OUT
L
COMPONENT
ANT
TO AUDIO AMP
VIDEO INPUTS
L
R
AUDIO OUT
VIDEO OUT
ANT IN
ANT OUT
Incoming
Cable
Use
either
the
S-Video or Video
connection.
R
L
R
L
R
INPUT 1
INPUT 2
VIDEO
TV/VIDEO
ACTION TV/VIDEO
CHANNEL
VOLUME
POWER
HPJ
S-VIDEO
VIDEO
L-AUDIO-R
INPUT 3
ON/OFF INDICATOR
POWER ON/OFF
CAMCORDER
Note:
The ON/OFF indicator LED (red) will be lit when set is on.
Note: The S-VIDEO connection provides higher quality picture. It
overrides VIDEO 3 connections. Use INPUT 3, AUDIO L
and R with S-VIDEO connection.