ENGLISH
A-9
CHAPTER 5 GENERAL DESCRIPTION
5.1 FEATURE SUMMARY
➀
Embedded ATAPI Interface.
➁
Automatic Loading with tray.
➂
Horizontal and Vertical Installation.
(Vertical : Vertical installation type only, 12 cm Disc only)
➃
Audio Playback Capability.
➄
MS-DOS CD-ROM Extensions Available.
➅
5 1/4" Half Height Design.
➆
Digital data Rewrite and Read capability.
5.2 SYSTEM SET UP
The ATAPI Devices are selected by the Address field in the Drive Select Register. When
a single Device is attached to the interface, it shall be set as Device 0. When the ATAPI
Device is attached along with an ATA Mass Storage Device, the ATAPI Device will be set
as Device 1 and respond as a Slave.
5.3 POWER SAVING
➀
When the drive waits for a command from the Host for more than five minutes,
then the drive enters Power Save Mode. Laser and Spindle motor stop.
➁
Re-start is automatic when the Host Command is received.
NOTE :
• ATAPI : AT Attachment Packet Interface.
• MS-DOS is a registered trademark of Microsoft Corporation.
