English
21
Advanced Operation
❑
Calling back
A call-back call can be made.
However, the callback function is disabled after disconnecting
Bluetooth communication. (e.g. communication disconnection
between the Bluetooth unit and mobile phone, and communica-
tion disconnection by turning off the power of the Head unit)
Step 1
Press the
[Hang-on]
after a call comes in.
Step 2
Confirm the telephone number on the Head unit.
Step 3
Press the
[Hang-on]
to make a call.
(Press
[Hang-up]
to activate cancellation.)
Note:
Some mobile phones cannot display the telephone num-
ber of an incoming call or call back.
❑
Rejection of incoming calls
Press the
[Hang-up]
to reject an incoming call.
❑
Disconnection of Bluetooth
You can disconnect Bluetooth temporarily.
Disconnection
Press and hold the
[Hang-up]
. for more than 2 seconds
until the indicator putting out (approximately 2 seconds ) to
reject call on this unit.
Reconnection
Press
[Hang-on]
. The LED turns from blinking to perma-
nent.
Note:
You cannot disconnect Bluetooth in the talking state but
end a call.
Summary of Contents for CYBT100U - CAR AUDIO
Page 39: ...Français 39 ...
