ー
111
ー
Operating Instructions
Intelligent Controller
130
Setting
Backing up/restoring data
Backing up data
You can save the setting data, accumulated/distribution data, and log data to a USB memory device.
You
can also backup over a network.
4
Touch [Save] for the items to be backed up.
z
Saving starts. When saving is complete, a message is displayed.
z
When backing up over a network, specify the location to save to.
z
To backup other items, repeat the same procedure.
4
5
Touch
when you w
ant to
disconnect the USB memory device.
z
Remove your USB memory device after the message “USB memory can now be safely removed” is displayed.
z
Close the storage door after removing the USB memory device.
5
1
Open the storage door and connect a USB memory device to the USB terminal.
z
This step is not necessary if you are backing up over a network.
2
Touch [Backup/CSV Output] in “Settings”.
z
The “Backup/CSV Output” screen is displayed.
2
3
Touch [Backup].
z
The “Backup” screen is displayed.
3
131
Setting
Backing up/restoring data
Note
y
Backup files are generated once per day and saved within this un
it.
This procedure saves the backup files saved in this unit to a US
B memory
device.
y
The items you can back up are as follows:
Database backup
Save accumulated/distribution data.
Main unit Set.
Save schedule settings and group settings.
Log
Save alarm logs and operation/status change logs.
y
The time required for backup depends on the volume of data.
y
The 4
types of backup file are icxsysset.zip, icxsyslog.zip, icxappset
.zip, and icxapplog.zip.
y
When backing up over a network, this operation is not possible if backing up from another terminal.
Backing up data
TGR-318_ENG.indb 111
2017/04/06 10:43:57