ー
116
ー
Operating Instructions
Intelligent Controller
140
Configuring the system
Setting
Configuring the system
This chapter describes how to make settings required to run the system.
The main settings are as follows:
y
Group settings (schedule, area, distribution)
y
Pulse meter settings, distribution mode settings, distribution ratio settings
y
Email settings
Screen menu
Overview
Page
Calendr sttngs for distr calc
Set specified days, cut-of
f days, particular time slots (regular hour ranges) and days of
the week for calculating distributions.
148
I/D unit settings
Change the settings on the indoor units.
141
Schedule group name settings
Edit the name of the schedule group.
151
Area group name settings
Edit the name of the area group.
153
Pulse meter settings
Make allocations between pulse meters and distribution groups.
158
Distribution mode settings
Set the mode used for distributing when calculating charges.
160
Distribution Ratio settings
Set the units for calculating electricity and gas usage charges.
161
Event control
Set the conditions for input points and output points to perform linked control.
162
Email settings
Configure the outgoing mail server
.
168
O/D unit settings
Change the settings on the outdoor units.
145
Distribution group settings
Edit the name of the distribution group.
155
Communication adapter setting
Register the communication adaptor connected to this unit.
170
141
Configuring the system
Setting
Basic settings on the indoor unit
Display details about indoor units (indoor unit addresses, groups belonged to, etc.). Settings can also be changed.
4
Put a check mark in the “Register” column.
z
Select the indoor units you want to manage.
z
This procedure is not necessary if central addresses have
been automatically set. (→ “Automatically setting central
addresses” (P
.144))
4
5
Touch [Register].
z
To cancel the settings, touch [Cancel].
5
1
Touch [System Settings] in “Settings”.
z
The “System settings” screen is displayed.
1
2
Touch [I/D unit settings].
z
The “I/D unit settings” screen is displayed.
2
3
Check the setting details (P
.142).
TGR-318_ENG.indb 116
2017/04/06 10:44:03
