ー
134
ー
Operating Instructions
Intelligent Controller
176
Maintenance settings
Setting
Initialising the unit and setting log levels
Initialise the unit and set and admin number (password) and log output levels.
Initialising
1
Select the type of initialisation.
1
Item
Explanation
@FctryShip
All data (settings, accumulated data, distribution data) is deleted.
ResetCumlDataFrT
oday
The accumulated data for the day is deleted. Use this after performing a test operation of the air conditioning units, for example.
2
Touch [Initialize].
z
Several confirmation messages will be displayed, so touch
[Y
es] each time.
z
Initialisation starts.
z
When initialising is complete, the message “Settings were reset. IntelligntCtrlr is restarting...” is displayed.
2
1
Touch [IntelContrlr maint] in “Settings”.
z
The “IntelContrlr maint” screen is displayed.
1
2
Touch [Initialize].
z
The “Initialize” screen is displayed.
2
All data is deleted when you initialise. Unless you are the administrator
, do not initialise under any circumstances.
177
Maintenance settings
Setting
Set the log output level
Set a level for outputting the log data recorded in this unit. The content of the log data output dif
fers according to the log level
that is set.
1
Select the log level.
1
2
Touch [Chng].
z
The setting is registered.
2
Setting admin numbers
Some menus require you to enter an admin number (password) to perform settings and operations.
There are two levels of admin
number (level
1 and level
2).
1
Enter an identification number for each
level.
z
The touchscreen keyboard appears when you touch the text box.
z
Use an identification number of at least 8
numbers
(alphanumeric only).
1
2
Touch [Register].
z
The setting is registered.
2
Initialising the unit and setting log levels
TGR-318_ENG.indb 134
2017/04/06 10:44:29
