ー
19
ー
Display and settings for the communication adaptor board
Various procedures
■ Main menu display
•
Press and hold the HOME key for 2 seconds or longer to display the menu display (level 0) screen.
In this status, the UP key or DOWN key can be pressed to select an item from the main menu.
On the main menu, 00 to 07 in the table below can be selected.
•
The main menu item number is displayed during and for 2 seconds after item change, and then the board
display content in the table below is displayed.
•
If an item (00 - 07) is selected and the SET key is pressed, the screen will shift to the detailed display screen
for that item.
Main
menu item
Board display content
Overview
↑
DOWN
UP
↓
Adaptor data display (*1)
Indoor unit data display (*1)
Outdoor unit data display
Error data display (alarm log) (*1)
Adaptor data settings
Adaptor initial settings
Physical address settings and check
Date settings and display
(* 1) There are currently no items to display.
•
Even during detailed settings, if you press and hold the HOME key, it will return to the main menu selection.
(Content in the process of being set will be discarded.)
•
If there is no operation for 30 seconds, the unit returns to the indication for air conditioner configuration.
(Content in the process of being set will be discarded.)
TGR-318_ENG.indb 19
2017/04/06 10:42:43
