ー
21
ー
Display and settings for the communication adaptor board
Various procedures
■ (04) Adaptor data settings
•
This screen is for browsing and changing the internal data of the communication adaptor and is not
normally used.
•
If (04: Adaptor settings) is selected on the main menu and the SET key is pressed, a screen with current
detailed information on the communication adaptor is displayed.
If there is no operation for 30 seconds, the unit returns to normal display.
•
Use the UP and DOWN keys to browse/set necessary data from the following items.
Select a data number using the UP and DOWN keys to display the data.
The characters to the right of the
point are the data.
Data display example
Data number
•
Adaptor detailed data
Data
number
Item
Display
Remarks
↑
DOWN
UP
↓
1
Pulse count 1
2345 times
2
Pulse count 2
2345 times
3
Pulse count 3
234 times
4
Interval for regular
communication 2
of air conditioner
linked system 1
18 minutes
5
Interval for regular
communication 2
of air conditioner
linked system 2
18 minutes
6
Communication speed
19200 BPS
7
Communication error
detection
10 minutes
8
EEPROM initialisation
9
Reset
10
No response settings
11
Delayed response
20 msec
12
No maintenance data
required
13
Central address
settings
TGR-318_ENG.indb 21
2017/04/06 10:42:43
