ー
78
ー
Operating Instructions
Intelligent Controller
64
Check accumulated values
Operation/Status
Check accumulated values
This chapter explains how to check the accumulated values for the devices.
You can check accumulated values for indoor units, outdoor units, and pulse meters in a list on this unit. The display for indoor units can be viewed by area or individual unit, and outdoor units and pulse meters can be viewed by dif
ferent values (adaptor value or total value for a period).
Screen menu
Overview
Page
I/D unit acc.
Check the accumulated data for the indoor units in a list.
65
O/D unit acc.
Check the accumulated data for the outdoor units in a list.
67
Pulse acc.
Check the accumulated data for the pulse meters in a list.
69
65
Check accumulated values
Operation/Status
Checking the list of accumulated values on
the indoor unit
The accumulated values for indoor units (thermostat ON operating times, etc.) are displayed in a list.
1
Touch [Accumulate/Distrib] in “Oper
./
Status”.
1
2
Touch [I/D unit acc.].
z
The “I/D unit acc.” screen is displayed.
2
3
Set the period to be displayed.
z
Set the start and end of the period to be displayed.
z
The time at the left is the start of the period and the time at the right is the end.
z
If you set “Data” to “Adaptor value”, you cannot select the period to be displayed.
(1) T
ouch
(3-1).
z
The “Calendar” dialogue is displayed showing the current date.
3-
1
(2) T
ouch the date (3-2).
z
Use
to select the month you want to check.
The
current month is displayed if you touch [ThsMth].
z
The settings are registered and the “Calendar” dialogue closes.
3-
2
4
Set the time slots to display
.
(1) T
ouch [T
ime] (4-1).
z
The “Specify time” dialogue is displayed.
z
If you set “Data” to “Adaptor value”, you cannot select the time slots to be displayed.
4-
1
Continued on next page
TGR-318_ENG.indb 78
2017/04/06 10:43:17
