2
CONTENTS
Safety Precautions ...................................................Cover
Speci
fi
cations .................................................................. 2
Dimensions (Part Names) ............................................... 2
Caution for Network Connection...................................... 2
Installation Precautions ................................................... 2
Installation Location ................................................. 2
General Precautions on Wiring ............................... 2
Mounting .......................................................................... 3
Mounting Position .................................................... 3
How to Mount (Control box) .................................... 3
Wiring .............................................................................. 3
Power Supply Wiring ............................................... 3
Inter-Unit Control Wiring .......................................... 3
External I/O Wiring .................................................. 3
LAN Cable ............................................................... 3
Basic Wiring Diagram .............................................. 3
How to Attach the Ring Pressure Terminal .............. 4
Connecting Wiring ................................................... 4
Connecting to External Equipment .................................. 4
Setting ............................................................................. 5
Preparation before Setting .......................................... 5
Adaptor Setting ............................................................ 6
Air Conditioner Setting ............................................... 6
Pulse Meter Setting ..................................................... 7
Network Setting ........................................................... 7
Preparation before Operation ...................................... 7
Test Operation .................................................Back cover
Speci
fi
cations
Model No.
CZ-CFUSCC1
Dimensions (mm)
<H> 255 × <W> 275 × <D> 80
Weight
1.9 k
g
Temperature/
Humidity range
0 °C to 40 °C /
20 % to 80 % (no condensation)
Rated voltage/
Rated frequency
Single phase
100-240 V ~ 50/60 Hz
Power consumption
Max. 15 W
Number of connectable
units
Indoor unit - Up to 64 units per link*
Outdoor unit - Up to 30 units per link
*: The number of indoor units includes the Interface Adaptor.
Supplied accessories
Installation Instructions
(1)
License List Disc
(1)
* Wiring are not included (
fi
eld supplied item).
Dimensions
(Part Names)
180
44.5
44.5
221
275
255
(mm)
80
235
LAN
Caution for Network Connection
When connecting to Internet, implement security
measures against illegal access from outside.
For detailed connection and setup method, consult the
network administrator.
Installation Precautions
Installation Location
Avoid the following locations for installation.
• Under direct sunlight
• Location near heat source
• Location where the controller will be splashed with water or
affected by dampness or humidity
• Uneven surface
• Location that is subject to excessive vibration or physical
impacts. (Fixing screws may come off, and the controller
may drop.)
Install the controller away from any sources of
electrical noise.
Install the controller to the locations where is suitable
to the temperature for using or environment.
General Precautions on Wiring
Regulations on wire diameters differ from locality to
locality.
For
fi
eld wiring rules, please refer to your LOCAL
ELECTRICAL CODES before beginning.
You must ensure that installation complies with all
relevant rules and regulations.
Use the
fi
eld supplied wiring with at least 1 mm in
thickness of insulation part including the sheath.
Connect all wiring tightly to prevent the terminal
board from loosening when the wiring connection
part is pulled by an external force. (Otherwise,
fi
re or
overheating may occur.)
Do not bury the inter-unit control wiring in the ground.
Do not store the power supply wiring and other wiring
in the same metal tube or bundle them together.
(An operational error from noise may occur.)
Symbols on the controller
This symbol refers to “Protective earth”.
This symbol refers to “Caution of Electrostatic”.
This symbol refers to “ON (power)”.
This symbol refers to “OFF (power)”.
CZ-CFUSCC1̲工説̲E.indd 2
CZ-CFUSCC1̲工説̲E.indd 2
2016/02/17 15:50:03
2016/02/17 15:50:03
