9
SETTING THE TIMER
1. How to set the present time
(Example) To set to 9:10 pm.
2. How to set the OFF time
(Example) To stop the air conditioner at 11:30 pm.
To cancel the setting, press the TIMER SELECT button twice.
3. How to set the ON time
(Example) To start operation at 7:10 am.
To cancel the setting, press the TIMER SELECT button three times.
4. How to set daily ON/OFF repeat timer
(Example) To start operation at 7:10 am. and stop the air conditioner
at 11:30 pm.
To cancel the setting, press the TIMER SELECT button once.
You can check the timer ON/OFF times after you have set them by
pressing the SET button.
5. Backup function
Even if the main power supply to the unit is turned off, the remote
controller will store the previous settings in its internal memory for up
to 8 hours. If the power is not turned back on within 8 hours, the
previous settings will be lost. In this case, the mode settings must be
reset by the user.
Operation
Indication
1.
Press the SET button three
times.
The time indication alone
flashes.
2.
• Press the HH button until
PM 9 is displayed.
• Press the MM button until
10 is displayed.
The display will flash for 10 sec.
and automatically stop flashing
except for the “ : ” symbol.
Operation
Indication
1.
Press the SET button twice.
The timer
indication alone
flashes and the previous set-
time is only displayed.
2.
• Press the HH button until
PM 11 is displayed.
• Press the MM button until
30 is displayed.
The display will change
automatically back to show the
present time after about 10 sec.
3.
Press the TIMER SELECT
button twice to set OFF time.
The present time and
are
displayed.
OFF TIME
Present time
Operation
Indication
1.
Press the SET button once.
The timer
indication alone
flashes and the previous set-
time is only displayed.
2.
• Press the HH button until
AM 7 is displayed.
• Press the MM button until
10 is displayed.
The display will change
automatically back to show the
present time after about 10 sec.
3.
Press the TIMER SELECT
button once to set ON time.
The present time and
are
displayed.
Operation
Indication
Set the timer ON/OFF times as
shown in 2 and 3.
The present time PM 9:10 and
are displayed.
ON TIME
Present time
ON TIME
Present time
OFF TIME
Programmed
daily ON / OFF
7:10 am.
ON
11:30 pm.
OFF
9:10 pm.
Present time
NOTE
Summary of Contents for cz-rd515u
