4
Auto restart control
If power is resumed after a power failure, the operation will restart automatically after a
period of time with previous operation mode and air
fl
ow direction.
• This control is not applicable when TIMER is set.
Operation mode
• It is possible to operate the indoor units individually or simultaneously. The priority of
operation is placed on the first unit that turned on.
• During operation, HEAT and COOL modes cannot activate at the same time for different
indoor units.
• The power indicator blinks to indicate the indoor unit is standing by for different operation
mode.
AUTO :
During operation, the POWER indicator will blinks at initial.
Single • Unit selects operation mode every 10 minutes according to the setting and room
temperatures.
Multi
• Unit selects operation mode every 3 hours according to setting temperature,
outdoor temperature and room temperature.
HEAT :
The POWER indicator blinks at the initial stage of this operation. Unit takes a while
to warm up.
COOL :
Provides ef
fi
cient comfort cooling to suit your needs.
DRY
:
Unit operates at low fan speed to give a gentle cooling operation.
Energy saving temperature setting
Operating the unit within the recommended temperature range may save energy.
HEAT :
20.0 °C ~ 24.0 °C / 68 °F ~ 75 °F.
COOL:
26.0 °C ~ 28.0 °C / 79 °F ~ 82 °F.
To learn more...
Single
Single split system
Multi
Multi split system
Summary of Contents for CZ-RL511D
Page 62: ...Memo ...
Page 63: ...Memo ...
