EN-5
EN
1. Press and hold
for more than 2 seconds to enter the
present day and time setting mode.
Once you enter the setting mode,
, “
”(day) and
“time” fl ash.
2. Set
“
” to today’s day of the week.
Press
*
1
to move “
” (fl ashing on the
display) in the order of : Su
→
Mo
→
Tu
→
.... Press
to move it in the order of : Su
→
St
→
Fr
→
....
*1
While in time setting mode, the Temperature setting
buttons function as
(changing day) button.
3. Press /
to change the present “hour” in the range of 0 to 23
*
2
.
Set the present hour and press
.
The “hour” digits light up, and the “minute” digits start fl ashing.
*2
If the clock uses the 12 hours AM/PM setting, the hour is displayed in the
range of AM 0 to 11/PM 0 to 11.
4. Press /
to change the present “minute” in the range of 0 to 59.
Set the present minute and press
. The day and time are set and the unit
fi nishes the setting mode.
Note
• The unit returns to the normal mode if
is pressed or there is no operation made for 3 minutes
during the setting. In this case, all the settings in progress will be lost.
• If the present time is invalid, “– – : – –” is displayed.
If the power failure for more than 1 hour occurs, check if the set data of day and time are valid.
3. Setting the Present Time
1,3,4
3,4
2
CZ-RTC2̲Main.indb EN-5
CZ-RTC2̲Main.indb EN-5
2011/06/16 15:26:14
2011/06/16 15:26:14
