91
VQT0N05
When the Card Access Lamp is blinking (or when the message
[ACCESSING CARD] appears), do not open the Card/Battery Door
to remove the card, turn this unit off, or subject it to vibration or
impact.
Do not leave the card in places where there is high temperature or
direct sunlight, or where electromagnetic waves or static
electricity are easily generated. Do not bend, drop, or subject it to
strong vibration.
≥
If the above precautions are not taken, the card or the recorded
content may be damaged.
Be sure to remove and store the card after use.
≥
Keep the card in the storage bag after use and when you store or
carry the card around.
≥
Do not allow dirt, dust or water to enter the terminals on the back of
the card. Do not touch it with your fingers.
≥
Keep the Memory Card out of reach of children to prevent
swallowing.
This unit comply with DCF standards (Design rule for Camera File
system) established by the Japan Electronics and Information
Technology Industries Association (JEITA).
≥
If files conforming to DCF standard are deleted, all the data related
to the files will be deleted.
≥
If you delete [Picture] or [MPEG4] files, all the data related to the files
will be deleted.
≥
As a result of improper operations, recorded data may be damaged
or erased. We are not responsible for the loss caused by the erasure
of the recording data. Please note it beforehand.
Card
Recorded Files
VQT0N05Eng.book 91 ページ 2004年11月22日 月曜日 午前10時12分