10
Power Supply
ª
Using AC Adaptor
1
Connect the DC Input Lead to the
[DC IN 4.8V] socket on the SD Video
Camera.
2
Connect the AC Adaptor to AC Main
socket.
ª
Charging the Battery
1
While holding the [
] part, slide it
to remove the Battery Compartment
Cover.
2
Press the terminals of the battery onto the
terminals of the Battery Compartment and
set the battery.
≥
Fit the battery with its label facing upward.
≥
After the battery is set, close the cover.
3
Connect the DC Input Lead to the [DC IN
4.8V] socket on the SD Video Camera.
≥
Be sure to turn the power switch on the camera
off when charging the battery.
4
Connect the AC Adaptor to AC Main
socket.
≥
Power Lamp flashes
1
, and charging starts.
5
Wait until Power Lamp
1
goes off.
≥
When recharging is completed, Power Lamp
goes off.
≥
Under normal operation the charging light stays on
during charging. If it blinks a charging problem may
be occurring. Please see page 48 for more details.
DC IN 4.8V
2
1
1
2
DC IN 4.8V
1
4
3
AV25PP.book 10 ページ 2003年11月25日 火曜日 午後12時5分