Section 400-Programming
Chapter 6. Name and Message Assignments (FF6)
DBS-2.3/9.2-400
DBS Manual - Revised April 2000
Page 6-3
Extension Name
Software Version: All Versions
Address: FF6 1# (ExtPort)# CONF (Name)#
Description
Names of up to 10 characters can be assigned to each extension number. An
extension’s name appears on the second line of its display. The name of an
extension being called appears on the top line of the display.
Extension names can also be assigned without entering the programming
mode, using the Attendant Feature option (see
Section 700-Feature
Operation
for instructions).
Programming
To assign an extension name ...
To clear an extension name ...
Notes
Using a DSS Console With AFP.
If the Attendant Feature Package (AFP) is
used (available only with CPC-B Version 2.0 to 4.0), the DSS console must
be initially set as type “11” in the
Terminal Type
address (FF3 ExtPort# 2#),
to enable the keys to perform programming functions.
FF6 1# (1-144)# CONF (NNNNNNNNNN)#
Extension Port
Text Name
(up to 10 characters)
FF6 1# (1-144)# CONF ON/OFF
Extension Port
Summary of Contents for DBS-2.3-400
