Chapter 9. Copy Program Settings (FF9)
Section 400-Programming
Page 9-4
DBS Manual - Revised April 2000
DBS-2.3/9.2-400
Extension Copy
Software Version: All Versions
Address: FF9 2# (SourceExtPort)# (TargetExtPort)##
Description
Use this address to copy the attributes of one extension to another.
Copying must be done on an extension-by-extension basis. The first
extension port entry in this address is the extension being copied
from
(the
source
); the second extension entry is the extension being copied
to
(the
target
).
Programming
Note:
You must enter two pound-signs (##) at the end of this address.
Notes
Copying Restrictions.
This address copies all extension attributes except the
extension number, telephone type, extension lockout code, and EM/24 port
number (BLF port setting).
Consideration for Call Forward ID Codes.
Do not use this address to copy
settings from an extension with a Call Forward ID Code. If the copied
extension settings include a Call Forward ID Code, the copy “target” will be
able to retrieve the messages of the copy “source.” For example, if you copy
extension settings from station 200 to station 300, station 300 will be able to
retrieve 200’s messages. Station 300 can retrieve 200’s messages because the
Call Forward ID Code for 200 is also assigned to 300.
FF9 2# (1-144)# (1-144)##
Extension Port Extension Port
(Source) (Target)
Summary of Contents for DBS-2.3-400
