DBS-2.3/9.2-400
DBS Manual - Revised April 2000
Page B-1
Appendix B. Terminal Programming
The body of this
Section 400
is devoted to programming the DBS system
through a key phone. However, the DBS can also be programmed remotely
via the Terminal Programming mode.
Using this mode, commands can be entered on a remote PC or terminal and
sent to the DBS via modem. Or, the PC/terminal can be connected directly to
the DBS’ SMDR port (CN6).
You can enter the Terminal Programming mode using any of the following
three methods:
•
Direct Connection:
Use a local PC or terminal and a communications
package to connect directly to CN6.
•
DISA:
Dial into the system through a DISA trunk.
•
Operator Transfer:
Dial into the system through a regular trunk, then
have the operator enter the Remote Programming ID Code.
This appendix gives an overview of these programming methods.
Terminal Programming Through a Direct Connection
To program the system through a PC or terminal connected to DBS serial port
CN6:
1. Make sure the cables are configured and connected as described in
Section
300-Installation
.
2. Make sure the DBS is in the SMDR mode. Dial the following codes from
the Attendant port:
ON/OFF #93
3. Enter your terminal communications program and make sure your PC or
terminal’s data communications settings match those of the DBS.
4. From your terminal communications program (terminal emulation in a PC
communications package), type the following command:
#99 xxxx
(where “xxxx” is the site’s password; system default is “9999”)
5. After the DBS displays “REMT>” on the computer, type
P
and press
ENTER.
6. Follow the directions on the screen to access the desired program.
Summary of Contents for DBS-2.3-400
