Section 400-Programming
Chapter 1. System Programming (FF1)
DBS-2.3/9.2-400
DBS Manual - Revised April 2000
Page 1-3
Date and Time Settings
Day/Date Setting
Software Version: All Versions
Address: FF1 1# 1# (MMDDYY)#
Description
This program sets the date in the DBS system clock.
The day and date are printed on the Station Message Detail Recording
(SMDR) printout. Proper LCR (Least Cost Routing) operation depends on
correct date settings. Proper operation of peripheral equipment may also
depend on correct date settings.
Programming
Special Programming
For Leap years starting February 2000 and beyond (2004, 2008, etc.), the date
must
be programmed as described below with small DBS KSUs (VB-42010
and VB-42020).
The order of the procedure is very important. The date must be programmed
first, then the day of the week.
Table 1-1. Date/Day of Week Programming Instructions (YOU MUST USE EXT 10 OR EXT 11).
1
2
3
4
One touch key No.1
Also called Personal Speed Dial keys. (lower
left key)
FF1 1# 1# (MMDDYY)#
Month, day, and year in numeric format
(for example, January 1, 1995 would be
entered as 010195).
Summary of Contents for DBS-2.3-400
