manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

The Panasonic DBS-2.3-400 Programming Manual is a comprehensive guide for users to efficiently navigate through the features and settings of this product. With step-by-step instructions, users can easily program their device for personalized usage. Download this manual for free at 88.208.23.73:8080, your go-to destination for user manual downloads.

Share
Download
background image

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

Index-3

Section 400-Programming

Index

adding with LCR ...................................... 8-14
old format, allowing ................................. 7-14

Circuit Types--

and T1 channels...................................... 1-161
for trunks .................................................. 2-18
station port class ....................................... 3-43
T1 digital pad settings ............................ 1-157

Class of Service--

assigning to extensions............................. 3-40
changing assignment to extension............ 3-40
defining features of................................... 1-70

CN6

1-55, 1-56, 1-57, 1-58, 1-59, 1-60, 1-61, 1-62, 

B-1

Conferencing--

unsupervised, allowing on extensions ...... 3-17
unsupervised, allowing on trunks............. 2-13
unsupervised, timer ................................ 1-104

Country Code Table--

building..................................................... 7-13

CPC Card Initialization

......................... Intro-4

D

Day Mode--

assigning to FF key .................................... 5-5
extension delayed ring assignments ......... 4-20
extension ring assignments......................... 4-3
hunt group delayed ring assignments ....... 4-21
hunt group ring assignments ...................... 4-4
start time, automatic ............................... 1-125
TRS during ............................................... 7-21

Day/Date Setting

........................................... 1-3

Default Program Settings

....................... Intro-9

Delayed Ringing--

enabling for CO calls................................ 1-30
enabling on extensions (BLF) .................. 1-39
extension assignment (Day) ..................... 4-20
extension assignment (Night 2)................ 4-29
extension assignment (Night)................... 4-22
hunt group assignment (Day) ................... 4-21
hunt group assignment (Night 2).............. 4-30
hunt group assignment (Night)................. 4-23
timer for CO calls ................................... 1-120
timer for extensions (DSS/BLF) ............ 1-122

Delete Digits--

in LCR ...................................................... 8-13

Dial Tone--

calling, assigning to FF key........................ 5-7
detection ................................................... 2-11

On/Off, assigning to FF key ...................... 5-5
T1 receive .............................................. 1-197
T1 transmission...................................... 1-195

Dial-Pulse--

and T1 incoming calls............................ 1-194
signal conversion to DTMF, assigning to FF key

5-5

trunk setting ............................................... 2-4

DID (Direct Inward Dialing)--

enabling trunks for ................................. 1-189
extension assignments (CPC-B 2.0) ........ 3-41
extension assignments (CPC-B 3.1) ...... 1-135
hardware and power requirements ......... 1-136
immediate/wink start on trunks................ 2-21
multiple DID/DNIS.................................. 1-41
name assignments .................................... 6-11
New Function Reset and ........................ 1-134
ring assignments .................................... 1-200
T1 dialing method, incoming calls ........ 1-194
timeout for dialing ................................... 2-23
timeout for interdigit dialing.................... 2-24
to a Voice Mailbox .................................. 1-46
trunk circuit types .................................... 2-18
Voice Mail answer code for..................... 1-48
wink start timer for trunks ....................... 2-22

Digital Pad Settings for T1

...................... 1-157

Directories--

extensions................................................. 3-39
PSD numbers, assigning to FF key ............ 5-6
SSD numbers, assigning to FF key ............ 5-6

DISA (Direct Inward System Access)--

auto answer ................................................ 2-8
automatic DISA callers ............................ 1-83
end time.................................................... 2-17
hardware requirement ................................ 2-8
ID code (inbound) .................................. 1-130
ID code 1 (outbound) ............................. 1-131
ID code 2 (outbound) ............................. 1-132
ID code for remote programming .......... 1-129
in remote programming ............................. B-2
limitations .............................................. 1-132
SLT ring pattern....................................... 1-44
start time .................................................. 2-16

Disconnect Signaling--

AEC disconnect (CPC-A) ........................ 3-41
AEC disconnect (CPC-AII/B) ................. 3-55
detection timer for trunks......................... 2-15
release acknowledge timer for T1.......... 1-150
T1 timer for ............................................ 1-148

DND (Do Not Disturb)--

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DBS-2.3-400

Panasonic KX-UT670 Getting Started Manual preview
KX-UT670
Brand: Panasonic Pages: 20
Panasonic KX-UT113 User Manual preview
KX-UT113
Brand: Panasonic Pages: 8
Panasonic Section 700 Operation preview
Section 700
Brand: Panasonic Pages: 289
Panasonic KX-UDT111 Operating Instructions Manual preview
KX-UDT111
Brand: Panasonic Pages: 60
Panasonic KX-UDT121 Operating Instructions Manual preview
KX-UDT121
Brand: Panasonic Pages: 68
Panasonic KX-TD208E Operating Instructions Manual preview
KX-TD208E
Brand: Panasonic Pages: 36
Panasonic T-Mobile KX-HDV130 User Manual preview
T-Mobile KX-HDV130
Brand: Panasonic Pages: 35
Panasonic KX-NT400 User Manual preview
KX-NT400
Brand: Panasonic Pages: 6
Panasonic KX-NT560 Manual preview
KX-NT560
Brand: Panasonic Pages: 11
Panasonic KX-DT543 Quick Reference Manual preview
KX-DT543
Brand: Panasonic Pages: 8
Panasonic KXDT346 - DIGITAL PROPRIETARY TELEPHONE Quick Reference preview
KXDT346 - DIGITAL PROPRIETARY TELEPHONE
Brand: Panasonic Pages: 5
Panasonic KXDT321 - DIGITAL PROPRIETARY TELEPHONE Specifications preview
KXDT321 - DIGITAL PROPRIETARY TELEPHONE
Brand: Panasonic Pages: 2
Panasonic KX-TVM200 Manual preview
KX-TVM200
Brand: Panasonic Pages: 24
Panasonic DECT Portable Station KX-TCA256 Quick Manual preview
DECT Portable Station KX-TCA256
Brand: Panasonic Pages: 12
Panasonic KX-T7636 Operator User Manual preview
KX-T7636
Brand: Panasonic Pages: 18
Samsung Vodafone SGH-L810V Service Manual preview
Vodafone SGH-L810V
Brand: Samsung Pages: 93
Uniden DECT1560 Series User Manual preview
DECT1560 Series
Brand: Uniden Pages: 64
Topcom Phonemaster 100 Operating Manual preview
Phonemaster 100
Brand: Topcom Pages: 20

Brands by name

Popular brands

Load more brands