5-22
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
CO, Extension, and Network calls may be parked.
There are two ways for an extension to park a call. One way is to park the call at the receiving
extension and to retrieve the parked call at another extension by dialing the park answer code plus the
parking extension number. The other way is to park the call at another extension and dial the park
transfer answer code at the other extension to retrieve the call. Beginning with Version 3.6, the user
may park the call at another extension by pressing the BLF key. In addition, an Extension Group
Pickup code allows the user to pick up a Transfer Recall (only on non-appearing calls), a Hold Recall,
and a Station Park Recall.
To park a call on this extension:
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
Action
Result
1. While on a call, press the
HOLD
key.
• Current call on hold
•
CO HOLD #XX
displays (where XX =
trunk number)
2. Enter the Call Park Hold access code (default =
771)
or press
the
PARK HOLD
key.
Accepted ST-Park
displays
3. If necessary, page the party that needs to retrieve the call.
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Enter the Station Call Park Answer/Other Ext. access code
(default
773)
.
OR...
Enter the Station Call Park/Floating Hold Answer feature
access code (default =
*9
).
Enter Park EXT
# displays
3. Dial the number of the extension that parked the call.
•
CO TALK TRK #XX
displays (where
XX = line number)
• Connected to parked call
Action
Result
1. Press the
HOLD
key.
• Current call on hold
•
CO HOLD #XX
displays (where XX =
trunk number)
2. Enter the Call Park Transfer access code (default =
774
).
Enter TRNS EXT #
displays
3. Dial the extension numbler to receive the parked call,
OR
Press the BLF key
Park (EXT#)
displays on lower display
4. If necessary, page the party that needs to retrieve the call.
