Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
5-23
To retrieve a transferred call park:
Hardware Requirements
•
N/A
Related Programming
•
FF1 (System): Extension Park Hold Recall Timer
•
FF1-0-02: Dial Control for Floating Hold Answer
Considerations
•
You cannot park more than one call at a time.
•
Call Park functions can be assigned to FF keys (see “Flexible Function Keys” on page 5-45).
•
No more than one Call Park Answer key may be assigned to a single telephone.
•
A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console.
•
If a call is parked by Call Park key, the LED flashes.
•
LCD softkeys are also available for Call Park.
•
Once a call is parked, it cannot be accessed by the CO line key or direct CO access (similar to
exclusive hold).
•
If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
•
Depending on the Station Park/Floating Hold Pickup setting (FF1-0-02-0025), the station park/
floating hold pickup code can set to
*9
(default),
773
. The floating hold pickup code (
*9
)
operates as follows:
Call Pickup
Description
The System allows the following types of call pickup:
•
Extension Group Pickup
•
Extension Direct Pickup
Action
Result
1. At the extension with the transferred park call, lift the hand-
set or press the
ON/OFF
key.
Intercom dial tone
2. Enter Call Park Answer/Self access code (default =
772
).
•
CO TALK TRK #XX
displays (where
XX = line number)
• Connected to parked call
System Size
Virtual Line Number and Operation
96
01-09 Floating Hold pick up
10-96: For Station Park Hold pick up purpose
