5-60
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
Related Programming
•
FF1-0-02: ARS for MCO Access Code 1/Route Advance for MCO Access Code
•
FF1-3: MCO Group
•
FF5-2: MCO Outgoing Trunk Assignments
•
FF5-3: MCO Incoming Trunk Assignments
•
FF4: FF Key Assignments
Considerations
•
Press the MCO key that flashes red to answer an outside call.
•
If you are already on a call appearing on an MCO key and you press another MCO key, a line on
the other MCO key is selected and the first call is dropped.
•
If a CO key is assigned, the CO Key LED will light when that specific trunk is used instead of
the MCO key LED.
•
There are five groups of outside lines:
9
and
81-84
(default).
•
MCO keys cannot be assigned on the DSS/72 or the EM/24.
•
An MCO key must be assigned in programming mode. The MCO key cannot be assigned by the
end user with FF key assignments.
Message Key
Description
The System supports the
MSG
key on the VB-44225 large-display phone. This key provides the
following functionality:
•
Message Wait Callback:
If a callback message has been left by another extension, you can
press the
MSG
key to place an automatic callback to that extension. If more than one callback
message has been received, pressing the
MSG
key performs auto-callback in the order
received.
•
Priority Message Wait Callback (One-Touch Voice Mail Access):
You can press the
MSG
key to automatically access your voice mailbox. The phone will dial your voice mailbox and
send access codes (if programmed) for retrieving new messages.
To place a call on System Trunk Hold
1. Press the
HOLD
key.
The key flashes green while the call is held.
To transfer a call
1. Press the
HOLD
key.
2. Dial the destination extension.
3. Press the
PROG
key (if on-hook transfer is
off) or go on-hook.
