6-6
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
Non-Verified Account Codes
Non-Verified Account codes are voluntary codes. (i.e., You do not have to enter an account code
before making a call.)
You can assign Non-Verified Account codes to both incoming and outgoing calls. To assign an
account code to an outgoing call, you enter the account code before making the call or during the call.
To assign an account code to an incoming call, you enter the account code during the call.
Operation
To enter an account code before making a call:
To enter an account code during an outside call:
Verified Account Codes
Stations restricted from outside call origination by Toll Restriction Service (TRS) can be allowed to
make outgoing calls by entering a Verified Account code that changes the TRS. After a call is made,
the SMDR record for the call will show the verified account code.
Operation
To make an outside call that requires an account code:
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Enter the Account Code feature code (default =
8#
).
3. Enter the Account Code (up to 10 digits).
4. Press the
#
key.
5. Press a vacant CO key or enter a trunk access code.
6. Dial the phone number.
Action
Result
1. During a call, press the
AUTO
key.
2. Press the
#
key.
3. Enter the Account Code (up to 10 digits).
4. Press the
#
key.
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Enter the Verified Account ID code (default =
8#
).
3. Enter the Account Code (10 digits).
