6-26
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
221 is forwarded to extension 225, calls that are transferred to extension 221 will be forwarded to
extension 225.
•
Calls can be transferred from paging using supervised transfer.
•
If a call is unsupervised transferred to a busy extension, the call will camp on to the busy
extension.
•
To transfer to a outside party, it is best to use supervised transfer. If the trunk-to-trunk on-hook
transfer restriction is enabled, a blind transfer will result in the loss of the second call but the
second call will be kept on hold. If not enabled and the second outside party is busy, the
transferred party will receive busy.
Camp-On (Call Waiting)
Description
If you dial a busy extension, you can camp onto that extension and send a Call Waiting signal to the
called party. The called party then needs only to replace the handset and pick it up again to be
automatically connected to the new call. The called party can also press the
HOLD
key to place the
first call on hold and then answer the waiting call.
The System provides two types of call waiting:
•
Automatic Call Waiting:
You do not need to enter a code to send the Call Waiting signal to
the busy extension. You need only to remain on the line.
•
Manual Call Waiting:
You must enter a code to send a Call Waiting signal to the busy
extension.
Operation
To set Automatic Camp-on:
To set Manual Camp-on:
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Dial the extension number.
• Called party hears alert tone
• Calling party hears ringback tone
3. Remain on the line until the called party answers.
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Dial the extension number.
Busy tone
3. Enter the Camp-on (Call Waiting) code (default =
2
).
• Called party hears alert tone
• Calling party hears ringback tone
4. Remain on the line until the called party answers.
