6-42
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
Considerations
•
Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
•
If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
•
If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
•
A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
•
ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
•
A monitoring extension cannot forward a call on hold to a monitored extension.
•
A monitored extension cannot receive a transferred call.
•
If DND is enabled on either the monitoring or monitored extension, DND status is displayed on
the calling extension’s telephone.
•
If the monitoring or monitored extension has an absence message set, the absence message will
be displayed on the calling extension’s telephone.
Speed Dialing
Description
The System supports the following speed dial features:
•
Personal Speed Dial (PSD)
•
System Speed Dial (SSD)
•
Speed Dial Linking
•
Speed Dial Name Assignment
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored
in PSD bins numbered
80
-
99
.
Operation
To assign PSD numbers:
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default =
710
).
3. Enter the PSD bin number (
80-99
).
4. Dial the phone number.
5. Press the
HOLD
key.
6. Replace the handset or press the
ON/OFF
key.
