7-16
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
Operation
To place a call on Broker’s Hold:
Hardware Requirements
•
N/A
Related Programming
•
F1-0-03: Extension COS (Hookflash Control on SLTs - Broker’s Hold or Conference)
•
FF3: Extension COS
Considerations
•
If Broker’s Hold is enabled, it is not possible to establish a conference call from an SLT position.
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
CO, Extension, and Network calls may be parked.
There are two ways for an extension to park a call. One way is to park the call at the receiving
extension and to retrieve the parked call at another extension by dialing the park answer code plus the
parking extension number. The other way is to park the call at another extension and dial the park
transfer answer code at the other extension to retrieve the call. Beginning with Version 3.6, an
Extension Group Pickup code allows the user to pick up a Transfer Recall (only on non-appearing
calls), a Hold Recall, and a Station Park Recall.
Operation
To park a call on this extension:
Action
Result
1. Pick up the first call.
2. Hookflash.
First call on hold
3. Pick up the second call.
4. Hookflash.
Second call on hold, first call retrieved
Action
Result
1. While on a call, press the hookswitch..
• Intercom dial tone
2. Enter the Station Call Park code (default =
771
).
3. If necessary, page the party that needs to retrieve the call.
