Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
7-17
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
To retrieve a transferred call park:
Hardware Requirements
•
N/A
Related Programming
•
FF1 (System): Extension Park Hold Recall Timer
•
FF1-0-02: Dial Control for Floating Hold Answer
Considerations
•
You cannot park more than one call at a time.
•
If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
Action
Result
1. Lift the handset
Intercom dial tone
2. Enter the Station Call Park Answer/Other Ext. code (default
=
773
).
OR...
Enter the Station Call Park/Floating Hold Answer code
(default =
*9
).
3. Dial the number of the extension that parked the call.
• Connected to parked call
Action
Result
1. While on a call, press the hookswitch.
• Intercom dial tone
2. Enter the Station Call Park Transfer code (default =
774
).
3. Dial the extension number to receive the parked call.
4. If necessary, page the party that needs to retrieve the call.
Action
Result
1. At the extension with the transferred park call, lift the hand-
set.
Intercom dial tone
2. Enter the Station Call Park Answer/Own code (default =
772
).
• Connected to parked call
