manualshive.com logo in svg

Panasonic DBS 576HD, Technical Manual

The Panasonic DBS 576HD Technical Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information to help users maximize the potential of their Panasonic DBS 576HD. Get your free manual at 88.208.23.73:8080, and unlock the full capabilities of your device.

Share
Download
background image

576-50-700

DBS 576HD (USA) issued September 2001

  3

Contents

 Chapter 1. About This Manual  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1

 Chapter 2. List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1

 Chapter 3. System Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1

AEC Disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-3
Attendant Groups  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-4
Automatic Call Distributor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-5
Automatic Route Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-6
Automatic Trunk to Trunk Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7
Background Music/MOH Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-7
Battery Backup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-8
Call Progress Tones  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-8
Caller ID  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-9
Caller ID Alpha Tagging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-9
Centrex/PBX Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-10
Class of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-11

Class of Service - Trunk/Tie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-11
Class of Service - Ext/Ext Restriction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-12
Class of Service - Extension Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-12
Class of Service - T1 Trunk Ring Back Service Tone  . . . . . . . . . . . . . . . . . . . . . . . . .   3-14
Class of Service - Trunk to Trunk Restriction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-14
Class of Service - Extension (Station) Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-15

CO Ringing Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-16

DID Ringing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-16
DIL Ringing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-17
DIL Delayed Incoming Ring Enhancement  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-18
DISA Ringing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-19
Multiple Ringing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-19

CO Trunk Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-19

CO Trunk Interface - DID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-20
CO Trunk Interface - Ground Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-20
CO Trunk Interface - ISDN BRI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-20
CO Trunk Interface - ISDN-PRI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-21
CO Trunk Interface - Loop Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-21

Computer Telephony Integration Capability . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-21
Data Security  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-22
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-22
Day/Night System Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-23

Manual Day/Night Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3-24

Summary of Contents for DBS 576HD



















































































































































































































































































































































































Reviews:

No comments

Related manuals for DBS 576HD

NEC Univerge SV8100 Reference Manual preview
Univerge SV8100
Brand: NEC Pages: 5
NEC Univerge SV8100 Quick User Manual preview
Univerge SV8100
Brand: NEC Pages: 2
NEC Univerge SV8100 Applications preview
Univerge SV8100
Brand: NEC Pages: 184
NEC Univerge SV8100 Voicemail Administration Manual preview
Univerge SV8100
Brand: NEC Pages: 8
NEC Univerge SV8100 Quick Reference Manual preview
Univerge SV8100
Brand: NEC Pages: 15
NEC Univerge SV8100 User Manual preview
Univerge SV8100
Brand: NEC Pages: 14
NEC UX5000 Hardware Manual preview
UX5000
Brand: NEC Pages: 334
NEC AccuSync 120 Advanced Features Manual preview
AccuSync 120
Brand: NEC Pages: 12
NEC Aspila Topaz Quick Reference Manual preview
Aspila Topaz
Brand: NEC Pages: 12
Panasonic KX-TG1061 Quick Manual preview
KX-TG1061
Brand: Panasonic Pages: 8
Panasonic KX-UT670 Admin Manual preview
KX-UT670
Brand: Panasonic Pages: 6
Panasonic KX-UT670 User Manual preview
KX-UT670
Brand: Panasonic Pages: 2
Panasonic KX-UT133-B Specifications preview
KX-UT133-B
Brand: Panasonic Pages: 2
Panasonic T-Mobile KX-HDV130 Operating Instructions Manual preview
T-Mobile KX-HDV130
Brand: Panasonic Pages: 116
Panasonic KX-TDA30 User Manual preview
KX-TDA30
Brand: Panasonic Pages: 214
Panasonic KX-TDA30 Features Manual preview
KX-TDA30
Brand: Panasonic Pages: 472
Panasonic T-Mobile KX-HDV130 Quick Reference preview
T-Mobile KX-HDV130
Brand: Panasonic Pages: 2
Viking CC-4 Technical Practice preview
CC-4
Brand: Viking Pages: 2

Brands by name

Popular brands

Load more brands