Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
7-35
Considerations
•
Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
•
If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
•
If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
•
A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
•
ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
•
A monitoring extension cannot forward a call on hold to a monitored extension.
•
A monitored extension cannot receive a transferred call.
Speed Dialing
Description
The System supports the following speed dial features:
•
Personal Speed Dial (PSD)
•
System Speed Dial (SSD)
•
Speed Dial Linking
•
Speed Dial Name Assignment
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored
in PSD bins numbered
80
-
99
.
Operation
To assign PSD numbers:
Action
Result
1. Lift the handset.
Intercom dial tone
2. Enter the Speed Dial Set/Clear code (default =
710
).
3. Enter the PSD bin number (
80-99
).
4. Dial the number.
5. Hookflash.
6. Replace the handset.
