3-38
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
•
Extensions
•
Trunks
•
Direct Inward Dials (DIDs)
•
Personal Speed Dials (PSDs)
•
Systems Speed Dials (SSDs)
Trunks names and DID names must be assigned in dealer programming mode. Extension names and
Speed Dial names may be assigned from a display telephone.
This feature does not require the use of a DSS/72 console or entering the programming mode.
Extension Name Assignments
Extension names can be up to 10 characters in length. (Assignment of extension names must be
allowed in the Extension Class of Service [COS].)
Operation
To set extension names using a large-display or small-display phone:
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Press the
PROG
key.
3. Press the
*
key.
4. Enter
2
for the Extension Name Assignment mode.
EXT
NO.=>
EXT NAME
displays
5. Enter the extension number.
6. Press the
HOLD
key.
XXX
A B C D E F XXX
displays (where
XXX = extension number)
7. Press the
FLASH
key to clear the existing data.
A B C D E F XXX
displays (where
XXX = extension number)
8. Enter the extension name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
3-39.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 3-40.)
9. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-Display Phone” on page 3-39.
• See “Example 2. Small-Display Phone” on page 3-40.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
