manualshive.com logo in svg

Panasonic DBS 576HD, Technical Manual

The Panasonic DBS 576HD Technical Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information to help users maximize the potential of their Panasonic DBS 576HD. Get your free manual at 88.208.23.73:8080, and unlock the full capabilities of your device.

Share
Download
background image

Contents

Section 700 - Operation

6

DBS 576HD (USA) issued September 2001

576-50-700

 Chapter 5. Key Telephone Features. . . . . . . . . . . . . . . . . . . . . . . . .  5-1

Key Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-4
Absence Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-4
Account Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-6

Non-Verified Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-7
Verified Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-7

Attendant Group Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-9
Auto Repeat Dial  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-9
Background Music. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-10
Busy Override  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-11
Callback Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-12
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-14

Call Forwarding-All Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-14
Call Forwarding - Busy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-15
Call Forwarding - No Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-16
Call Forwarding-All Calls and Do-Not-Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-17

Call Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-18

System Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-18
Floating Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-19
Exclusive Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-20
Broker’s Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-21
Call Park  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-21

Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-23

Extension Group Pickup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-24
Extension Direct Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-25
Trunk Group Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-25
Trunk Direct Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-26

Call Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-27

Supervised Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-27
Unsupervised Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-28
Camping a Call Onto a Busy Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-29

Caller ID Call Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-30

Call Log Operation on a 

Small- and Large-

Display Key Telephones. . . . . . . . . . . . . .   5-30

Camp-on (Call Waiting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-31
Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-34
Directory Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-35
Display Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-39

Large-Display Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-40
Small-Display Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-41
Changing the Display Contrast  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5-41

Do-Not-Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-42
DP to DTMF Signal Conversion  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-43
DSS/72 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
EM/24 Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-44
Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-45
Flexible Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-45
Handsfree Answerback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-52

Summary of Contents for DBS 576HD



















































































































































































































































































































































































Reviews:

No comments

Related manuals for DBS 576HD

Panasonic KX-TD1232NE User Manual preview
KX-TD1232NE
Brand: Panasonic Pages: 252
Panasonic KX-TG5431 Quick Manual preview
KX-TG5431
Brand: Panasonic Pages: 8
Panasonic KX-TD816AL User Manual Addendum preview
KX-TD816AL
Brand: Panasonic Pages: 67
Uniden EXT 1960 Owner'S Manual preview
EXT 1960
Brand: Uniden Pages: 46
Uniden FP1355 Owner'S Manual preview
FP1355
Brand: Uniden Pages: 32
Uniden WXI377 Manuel Du Propriétaire preview
WXI377
Brand: Uniden Pages: 48
Sagem D30H User Manual preview
D30H
Brand: Sagem Pages: 64
Ole M182 User Manual preview
M182
Brand: Ole Pages: 35
info-hold MP-3000 M Installation Manual preview
MP-3000 M
Brand: info-hold Pages: 2
GE 21026 User Manual preview
21026
Brand: GE Pages: 120
3Com NBX 900-0208 Telephone Manual preview
NBX 900-0208
Brand: 3Com Pages: 130
DMGT SV8100 User Manual preview
SV8100
Brand: DMGT Pages: 3
Geemarc ClearSound MyDECT 100 User Manual preview
ClearSound MyDECT 100
Brand: Geemarc Pages: 71
LG GDC-335H User Manual preview
GDC-335H
Brand: LG Pages: 84
Shiro SD8101 User Manual preview
SD8101
Brand: Shiro Pages: 27
Panduit Altona AT-CAP-SP100 Manual preview
Altona AT-CAP-SP100
Brand: Panduit Pages: 16
Hama Prestige Quick Start Manual preview
Prestige
Brand: Hama Pages: 11
Hama 201511 Operating Instructions Manual preview
201511
Brand: Hama Pages: 20

Brands by name

Popular brands

Load more brands