Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
3-43
SSD Names:
To set SSD names using a large-display or small-display phone:
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
Action
Result
1. Lift the handset or press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the
*
key.
4. Enter
1
for the SSD Name Assignment mode.
SSD
NO.=>
SSD NAME
displays
5. Enter the speed dial bin number (
00
-
79
or
000
-
799
).
6. Press the
HOLD
key.
-SSDXXX
A B C D E F XXX
displays (where XXX
= specified SSD bin number)
7. Press the
FLASH
key to clear the current data.
A B C D E F XXX
displays (where XXX
= specified SSD bin number)
8. Enter the speed dial name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
3-39.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 3-40.)
9. Use the bottom row of FF keys to select a single letter.
• See “Example 1. Large-display phone” on page 3-39.
• See “Example 2. Small-display phone” on page 3-40.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
10. Repeat steps 8-9 as many times as necessary to enter the
desired SSD name.
Note:
Press the
FLASH
key to clear the entire entry.
11. Press the
HOLD
key when finished.
Next SSD bin number displays
12. To enter another speed dial name, press the
CONF
key and
repeat steps 5-11.
SSD
NO.=>
SSD NAME
displays
