4-4
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
5. Enter the Message number (
0-9
).
6. Press the
HOLD
key.
A B C D E F
X
displays (where X = Absence Message
number)
7. Enter the Absence Message (up to 15 characters):
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
4-19.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 4-20.)
Note:
Press the
FLASH
key to clear any existing data.
8. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 4-19.
• See Example 2. Small-display phone on page 4-20.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
9. Repeat steps 7-8 as many times as necessary to enter the
desired Absence Message.
Note:
Press the
FLASH
key to clear the entire entry.
10. Press the
HOLD
key to store the entry.
Next message number displays
11. To set additional Absence Messages, press the volume up
or down key or press the
HOLD
key to move to the desired
Absence Message.
Desired Absence Message displays
12. Repeat steps 7-11 until all Absence Messages are entered.
13. Press the
AUTO
key to exit the entry mode.
Enter Msg #
displays
14. To return to the top menu level (
81
), press the
PROG
key.
OR...
To exit the User Maintenance mode, press the
ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF
LED goes off
Action
Result
