manualshive.com logo in svg

Panasonic DBS 576HD, Technical Manual

The Panasonic DBS 576HD Technical Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information to help users maximize the potential of their Panasonic DBS 576HD. Get your free manual at 88.208.23.73:8080, and unlock the full capabilities of your device.

Share
Download
background image

Section 700 - Operation

Contents

576-50-700

DBS 576HD (USA) issued September 2001

  9

Speed Dial Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-45

Station Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-47
Timed Reminder Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-48
Trunk Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-49

Direct Trunk Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-49
MCO Trunk Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6-50

Trunk Queuing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-51
Universal Night Answer to Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-52
Walking TRS Class of Service  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-53

 Chapter 7. SLT Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-1

Absence Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-3
Account Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-4

Non-Verified Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-5
Verified Account Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-5

Attendant Group Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-6
Busy Override  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-7
Callback Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-8
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-9

Call Forwarding-All Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-9
Call Forwarding - Busy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-10
Call Forwarding - No Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-11
Call Forwarding and Do-Not-Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-12

Call Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-13

System Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-13
Floating Hold (Retrieve Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-14
Exclusive Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-15
Broker’s Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-15
Call Park  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-16

Call Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-18

Extension Group Pickup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-18
Extension Direct Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-19
Trunk Group Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-20
Trunk Direct Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-20

Call Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-21

Supervised Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-21
Unsupervised Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-21
Camping a Call Onto a Busy Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7-22

Camp-On (Call Waiting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-23
Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-24
Do-Not-Disturb (DND)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-25
Flash Send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-27
Hot Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-27
Intercom Calling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-28
Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-29
Message Waiting/Callback  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-29

Summary of Contents for DBS 576HD



















































































































































































































































































































































































Reviews:

No comments

Related manuals for DBS 576HD

Samsung SGH-M600 Manual preview
SGH-M600
Brand: Samsung Pages: 68
Samsung SGH-E715 Manual preview
SGH-E715
Brand: Samsung Pages: 89
Samsung GT-S5830B Service Manual preview
GT-S5830B
Brand: Samsung Pages: 72
Samsung GT-I8190 Servise Manual preview
GT-I8190
Brand: Samsung Pages: 59
Samsung DS 616 Technical Manual preview
DS 616
Brand: Samsung Pages: 42
Samsung NX-828 User Manual preview
NX-828
Brand: Samsung Pages: 15
DAC Limited 711 Series User Manual preview
711 Series
Brand: DAC Limited Pages: 12
Uniden D3098 Series Manual Para El Usuario preview
D3098 Series
Brand: Uniden Pages: 32
Unify OpenScape Desk Phone CP400T User & Administator Manual preview
OpenScape Desk Phone CP400T
Brand: Unify Pages: 130
Unify OpenScape Desk Phone CP100 Installation And Quick Reference Manual preview
OpenScape Desk Phone CP100
Brand: Unify Pages: 36
Uniden DSS 7905 Brochure & Specs preview
DSS 7905
Brand: Uniden Pages: 6
Panasonic KX-TVM50 Feature Manual preview
KX-TVM50
Brand: Panasonic Pages: 120
Yealink W76P Quick Start Manual preview
W76P
Brand: Yealink Pages: 8
Yealink W56 Quick Reference Manual preview
W56
Brand: Yealink Pages: 2
Uniden DECT1340 User Manual preview
DECT1340
Brand: Uniden Pages: 6
Ole M182 User Manual preview
M182
Brand: Ole Pages: 35
info-hold MP-3000 M Installation Manual preview
MP-3000 M
Brand: info-hold Pages: 2
Facebook Portal Go Reviewer'S Manual preview
Portal Go
Brand: Facebook Pages: 5

Brands by name

Popular brands

Load more brands